:: View topic - Socrp Duraclear topsheet

Anyone interested in Socrep Duraclear Topsheet material? I'm looking at purchasing some, but I have to buy 200m which leaves more than enough to go around. After I pay for shipping from France, I'd be looking at selling it for $10 per meter. This is the same stuff that Rossignol and Dynastar use on some of their skis. http://www.socrep.com/ang/products/ski/index.html#top

Let me know if you have any interest, its a big commitment to buy 200m, but I'll do it if some people would like to take some off my hands.

Todd

todd.aspenmtg@gmail.com

isnt the isosport 8210 better?

MM, Not sure, I haven't tried it or been able to contact anyone at IsoSport to get any info. Do you have any contact info for them ?

Min order from iso is like 3000m

I suggest you talk to vince from miller studio as he has experience with many of these materials and there is a reason he uses and carries what he does.

I'll give him a call to see what he says. 3000m of Iso is definitely not an option. The Duraclear i've tested looks great, but I'm always open for better options. Thanks for the info

3000 meters? are you sure its that much?

I can assure you it's that much.

I'll order few rolls of clear topsheet material from socrep soon.

Here are the details:

Duraclear 0.3mm thick, 500mm wide, with protective film on top

more we are to order, cheaper the freight charges will be (sea freight, custom duties, brokerage, etc)

PM if you are interested,

Julien

www.evasionkiteboards.com

We might order if we knew what this was? Is this a textured material? Is it UHMWPE nylon? Or something else? I have never seen this stuff.

It is TPU (thermoplastic polyurethane) with UV stabiliser. Gloss finish, corona treated on the bonding side and protective film on the top side.

very common material in the ski and snowboard industry. Socrep is probably the biggest supplier of clear topsheet in the industry.

Julien

www.evasionkiteboards.com

OOOO... A CLEAR TPU TOPSHEET?

Cool. I'M in for some.

I am down for some also

I've already received 10m sample, and I'm working out the details for a 200m order. I'll let everyone know when I get the final prices for shipping and customs. Should be in the next week or two.

Raccoon - if you have a couple meters you don't mind to sell I might take some when you got it, just to have a look at the material and see if I can do something I like with it.

Thanks

Ya, this sounds like good topsheet. I will also purchase a few meters from you. Thanks for the offer.

Cheers,

-S

I've got parts to a ski press for sale:

10x80 MEI heater with controller, rated to 250 degrees $550 +shipping

8 foot long, clamped, ready to use air bladder, rated to 250 psi $75 + shipping

20 feet of unused 10" layflat fire hose for air bladder $6/ft +shipping

Email inquiries to TrevorAWalton@gmail.com

Anyone have any 6.5mm M6 thread inserts I could buy? I need 20

Bump...

We placed our order yesterday. It will take around 3-4 weeks before we get the material (sea freight).

we will be able to sell at 6-7$ per meter (500mm wide) maybe less depending how many we are.

PM asap if interested to book your order from us.

Julien

www.evasionkiteboards.com

Just picked up my Duraclear topsheet at the factory in France. It is the same material supplied to Rossignol, Volkl, Dynastar, Salomon, and Burton. 0.5mm x 320mm Glossy, with protective film. I saw a production run for Rossignol while on my factory tour.

I purchased 100m roll, and I would like to sell about 30m. Email me if you have some interest. I can't beat Evasion's price he must be getting a better deal for a large buy. I had free flights to Europe, and after my cost and expenses to pick up the material, I'll sell it for what i'm into it. $13/m plus shipping. Much better quality than PBT and P-tex for about the same price.

Email if you're interested.

7evenskis@gmail.com

Hi there,

We received the topsheet materials this morning.

For those who have contacted me for the grouped order, here is my paypal address: racca_julien@hotmail.com

Shipping cost are as follow (from canada post website):

12m (and less) = $25-$28 (depending on location)

12-20m = $34-$40 (depending on location)

50m = $50-$65 (depending on location)

please visit canada post website for actual shipping charges to your location (my zip code is G0W 2L0)

The price is $7.5/m for 20m or less, $7/m for 20 to 50m.

The material is 50cm wide

all price are in canadian dollar.

Julien

www.evasionkiteboards.com

This stuff is clear, clear, not milky transparent right?

Super Clear, and can be digitally backprinted. I just had some done by a friend who prints vinyl carwraps and the test bonded perfectly. http://www.facebook.com/photo.php?fbid=271016193001298&set=a.249633558472895.36558.173858612717057&type=1&theater

I only have 15m left for sale, but evasionkites probably still has a bunch. Either way, its great stuff.[/img]

awesome!! could you ask your printing guy what sort of printer and inks he uses? i guess its some sort of solvent / eco-solvent system...

It is an eco-solvent ink system. I'll be going to see him on monday at his shop. I'll get more info for you about the inks and printer.