unknownTue Sep 04, 2012 12:26 pm
I was thinking about making some skis with wood bases.
Why? Why not... old school goodness. Less Plastic.
My main concern is glide... I've found websites with info on how to use pine tar and glide wax etc. but I'm wondering how well it will work for downhill?
Anyone have experience with that?
I also talked to a guy who makes wood base snowboards... and he puts a layer of epoxy on the base and then waxes them like regular p-tex... so I might try that.
However, I remember reading on here maybe a couple years ago of someone who had done this and found a good way, but I couldn't find the post.
anyone remember who that was? or where that post is?
other thoughts on the matter?
unknownTue Sep 04, 2012 1:40 pm
Yea, I tried it. The skis looked great but didn't have much luck getting them to glide. After 2 shorts run the wax was gone. I tried hot waxing, pine tar (it smells real bad), pine tar and hot wax. Removing the pine tar is a real PITA. Don't bother using it. I never did try the epoxy.
I talked/emailed the guy at PowderJets, he used epoxy on the base. Maybe I'll give the epoxy a try for kicks. But epoxy seems like it's a maintenance hassle over time.
http://www.skibuilders.com/phpBB2/viewtopic.php?t=2845
http://www.skibuilders.com/phpBB2/viewtopic.php?t=2905
unknownTue Sep 04, 2012 1:41 pm
HA! You must have beat me by 3 seconds )
unknownTue Sep 04, 2012 1:52 pm
Ha! I think I'm going to dust them off this season and give them another try.
unknownTue Sep 04, 2012 1:56 pm
unknown
Oh I like this. This is so old school
In 1989 I build my first snowboard using just 3 layers of plywood. I used a clamp press and regular wood glue. We painted the whole thing with epoxy and it worked great. At that time we also had the old type of steel edges attached with screws. My first bindings were parts from a pair of roller skates and the shoes we used were moon boots...
Build it and let us know how it works!
Cheers!
