Hi everybody !
The little frenchy that I am would like to know everything about Topsheet sublimation:
- What temperature/pressure shall be reached ?
- For how long ?
- Shall the temperature increasing be fast ? How fast ?
- If you have any other information about PE sublimation, do not hesitate to communicate it
Thank you so much for your help gentlemen !
How much does it cost, all up, for one pair of skis, for all of the materials?
And also, how much does it cost to make the press, bladder, and all the other tools you need to make?
I spend no more than 30euros for the wood, 20euros for glass and epoxy and 30 euros for base and edges. That is about 80 euros per pair. Few more when I use carbon.
Does anyone have a mail order supplier for sidewall material (ABS or P-tex). I've tried to get it locally, but no luck in Anchorage. Have you been buying rod stock or flat sheets and cutting it?
Thanks
durasurf sells 1/2" thick P-tex sheets that you cut strips from and laminate to your core. it seems to work well.
Thanks littleKam, I'll check with them.
Here are the places I have used for UHMWPE (P-Tex)
http://www.k-mac-plastics.com/uhmwpe-square-rectangle-bar-stock.htm
